Azpects EASYCare Algae Remove & Seal – complete user guide

Azpects EASYCare Algae Remove & Seal – complete user guide

Azpects EASYCare Algae Remove & Seal – complete user guide

Azpects EASYCare Algae Remove & Seal is a professional 2-in-1 outdoor treatment designed to remove algae, mould, moss, and lichen while sealing surfaces to help prevent regrowth. This complete guide explains how to use it safely and effectively, with tips to achieve long-lasting results.

What is Azpects EASYCare Algae Remove & Seal?

Azpects EASYCare Algae Remove & Seal is a ready-to-use outdoor surface cleaner and sealer ideal for homeowners looking for an effective, low-effort solution to organic growth. Unlike standard cleaners, it not only removes contamination but also leaves behind a water-repellent seal to reduce moisture absorption.

Key benefits

  • Cleans, kills, and seals surfaces in one simple application.
  • Removes algae, mould, moss, and lichen while helping to prevent regrowth.
  • Leaves a water-repellent protective seal that reduces moisture penetration.
  • Suitable for patios, decking, paths, fencing, walls, paving slabs, and garden furniture.
  • Provides up to 12 months of protection, depending on surface porosity and exposure.
  • Supplied in a ready-to-use 3L bottle covering approximately 18 m².
  • No dilution required – apply directly for maximum effectiveness.

Safety and precautions before use

To achieve the best results and protect surrounding areas, always follow these safety guidelines before application:

  • Carry out a patch test on a small, hidden area before full application.
  • Wear suitable PPE including gloves, long sleeves, and eye protection.
  • Apply only in dry weather to a completely dry surface.
  • Avoid application in direct sunlight to prevent rapid evaporation.
  • Ideal application temperature is between 10°C and 20°C.
  • Do not apply if temperatures are below 5°C or frost is forecast.
  • Store between 5°C and 25°C, away from direct sunlight and frost.
  • Do not mix with other chemicals.
  • Keep pets and plants away until the treated surface is fully dry.

How to apply Azpects EASYCare Algae Remove & Seal

Step-by-step application guide

1. Prepare the surface

Sweep or brush away loose dirt, leaves, moss, and debris. This allows the treatment to penetrate properly and work evenly.

2. Shake before use

Shake the bottle thoroughly to ensure the cleaning and sealing agents are fully mixed.

3. Apply a generous, even coat

Apply the solution using a brush, watering can, or low-pressure sprayer. Ensure full and even coverage across the surface for best cleaning and sealing performance.

4. Apply a second coat if required

For heavily soiled areas or thick algae build-up, apply a second coat before the first has dried, typically within 20 minutes.

5. Mop up excess liquid

Remove any pooling or puddles with a mop or cloth to avoid patchy sealing or uneven drying.

6. Do not rinse

Leave the product to dry naturally. Rinsing will remove the sealant and reduce long-term effectiveness.

7. Allow time for curing and protection

  • Visible cleaning results often appear within a few hours.
  • The water-repellent seal forms as the product cures – initial water beading is normal.
  • Maximum protection develops over approximately 14 days.

Maintenance and long-term care

To keep outdoor surfaces algae-free for longer:

  • Reapply every 12 months or sooner if algae begins to return.
  • After heavy rainfall during early curing, check for water beading to confirm the seal is forming correctly.
  • On very porous or rough surfaces, consider using a stronger pre-cleaner first, then apply EASYCare Algae Remove & Seal for extended protection.
  • Always remove loose debris before reapplication.

Environmental and disposal guidance

  • Avoid over-application to reduce runoff into lawns, soil, or water features.
  • Dispose of empty containers responsibly in line with local waste regulations.
  • Never pour unused product into drains or natural water sources.

Shop Azpects EASYCare Algae Remove & Seal

If you’re looking for a reliable, low-maintenance solution for algae and organic growth, Azpects EASYCare Algae Remove & Seal offers long-lasting protection with minimal effort.

Explore our full range of outdoor cleaning and sealing products to keep your patios and hard surfaces looking their best all year round.

Back to blog