Why Azpects EASYseal Water Seal Plus is a game-changer for outdoor protection

Why Azpects EASYseal Water Seal Plus is a game-changer for outdoor protection

Rain, frost and morning dew can lead to algae, mould and moisture damage across patios, driveways and garden walls. Azpects EASYseal Water Seal Plus is a high-performance, water-based masonry and paving sealer that creates a breathable, invisible barrier to help stop water penetration without changing the look of the surface. It is ideal as a patio sealer, driveway sealer and stone sealer for long-lasting protection.

Buy Azpects EASYseal Water Seal Plus or explore our wider range of landscaping products for complete outdoor care.

What is EASYseal Water Seal Plus

EASYseal Water Seal Plus is a deep-penetrating, water-based sealer formulated for porous surfaces such as natural stone, brick, concrete and masonry. It allows trapped moisture vapour to escape while repelling liquid water at the surface, helping to keep substrates drier and cleaner for longer.

Key benefits

• Deep penetrating protection - helps prevent frost damage, efflorescence and algae growth.
• Breathable formula - lets moisture vapour escape to reduce the risk of cracking and spalling.
• Invisible finish - preserves the natural appearance with no sheen or colour change.
• Long lasting - durable protection from a single application, depending on porosity and exposure.
• Eco-friendly and low odour - water-based, low VOC, suitable for residential and landscaping projects.

If you have recently invested in a new patio, driveway or stone path, sealing is one of the smartest ways to maintain a clean, long-lasting finish and reduce water-related damage.

How to use Azpects EASYseal Water Seal Plus

Before you start, make sure the surface is clean, dry and free from stains, moss and algae. If required, pre-clean with a suitable patio or stone cleaner, then allow to dry fully.

you will need

• Azpects EASYseal Water Seal Plus
• Low-pressure garden sprayer, brush or roller
• Protective gloves and eye protection
• Clean cloth or roller sleeve for spreading out any excess
• A dry day with no rain forecast for at least 4 to 6 hours

1. check the weather

   Choose a dry day between 5°C and 25°C. Avoid application if rain is forecast within 4 to 6 hours.

2. prepare the surface
   • Remove dirt, dust, moss, algae and grease.
   • Allow the surface to fully dry after washing - typically 24 hours.
   • Mask off adjacent areas you do not want to treat, such as plants or windows.
3. apply the sealer
   • Stir the product well before use.
   • Apply generously with a sprayer, brush or roller to saturate the surface evenly.
   • Work in manageable sections and avoid pooling to ensure a uniform, invisible finish.
4. wipe away excess
   • If product puddles on the surface, use a clean cloth or roller to spread it out evenly.
   • Allow a minimum of 4 hours before exposure to rain or foot traffic.
5. curing time
   • Initial protection develops as the surface dries.
   • Full performance is typically achieved within 24 hours. Avoid cleaning or scrubbing during this period.

Ideal surfaces for EASYseal Water Seal Plus

• Concrete driveways and paths
• Patios in natural stone such as sandstone and limestone
• Brick walls and block paving
• General masonry and porous hard landscaping

Pro tip: always test on a small, inconspicuous area first to confirm compatibility and to gauge the coverage rate for your specific substrate.

Maintenance and longevity

• Protection typically lasts several years, depending on exposure and porosity.
• To check effectiveness over time, sprinkle water on the surface. If it beads, the sealer is still performing.
• Clean with a mild, pH-neutral cleaner as needed and avoid harsh acids that can degrade sealers.

FAQs

Will it change the colour or finish

No. The finish is invisible once dry, preserving the natural look of stone, brick and concrete.

Can i use it on newly laid paving

Yes, once the substrate is fully dry and free of laitance, efflorescence and installation residues. Always test first.

How often should i reapply

Reapplication intervals vary with climate and traffic. Inspect annually. When water no longer beads, plan a top-up coat.

Is it suitable for vertical surfaces

Yes. It can be applied to brick and masonry walls. Apply from the bottom up to avoid runs and ensure even saturation.

Related products and next steps

Ready to protect your surfaces? Shop Azpects EASYseal Water Seal Plus. For complementary cleaners and tools, browse our landscaping products, and if you are treating driveways, you may also be interested in our tarmac sealants.