The ultimate guide to Azpects EASYJoint jointing compound

The ultimate guide to Azpects EASYJoint jointing compound

The ultimate guide to Azpects EASYJoint jointing compound

Azpects EASYJoint is a premium brush-in paving jointing compound designed for quick, durable, and professional-looking results. It’s ideal for use with natural stone, porcelain, and concrete paving, and is particularly popular for patios, driveways, and paths. This guide covers everything you need to know, from preparation to maintenance, to help you achieve a long-lasting, flawless finish.

1. What is EASYJoint?

EASYJoint is a ready-mixed, resin-based jointing compound that is applied with water, allowing for rapid filling of joints between paving slabs or blocks. It’s self-compacting, meaning it fills joints completely without the need for manual ramming, and it sets hard yet remains slightly flexible to accommodate movement.

Key features:

  • Suitable for all-weather use (can even be applied in the rain)
  • Fast and easy brush-in application
  • Works with most paving types
  • Resistant to weed growth and cracking
  • Permeable to allow water drainage
  • Available in a range of colours: Mushroom, Basalt, Stone Grey, Jet Black, and Tungsten

2. Where to use EASYJoint

EASYJoint works best for:

  • Natural stone paving (sandstone, limestone, slate, granite)
  • Porcelain or ceramic tiles (with appropriate joint width)
  • Concrete slabs or setts
  • Pedestrian areas, patios, and paths
  • Light vehicular traffic (when joints are fully compacted and paving is stable)

Joint width and depth:

  • Minimum joint width: 3mm
  • Minimum joint depth: 20mm

3. Tools and materials needed

  • EASYJoint compound (1 tub covers approx. 7–10 m² depending on joint size)
  • Stiff broom and soft brush
  • Hose with a gentle spray nozzle
  • Clean water supply
  • Rubber squeegee or pointing trowel (optional)
  • Protective gloves and knee pads

4. Surface preparation

  1. Lay paving correctly: Ensure paving is firmly bedded with no rocking or movement. Joints should be at least 20mm deep and 3mm wide.
  2. Clean the area: Remove all debris, dust, and loose mortar.
  3. Pre-wet thoroughly: Soak the entire paved area before opening the tub. EASYJoint must only be used on a wet surface to prevent staining and help the compound flow smoothly.

5. Application instructions

Step 1: Open and stir

Open the tub and loosen the compound slightly with a trowel or stick. Do not add water to the tub itself.

Step 2: Keep paving wet

Continuously keep the surface and joints wet during application. Use a light spray rather than a strong jet to avoid washing out joints.

Step 3: Pour and brush in

Pour a small amount of compound onto the wet paving. Using a stiff broom, sweep the compound diagonally across joints to fill them completely. Compress the compound in with a jointing iron or tuck pointer for best results.

Step 4: Compact and top up

Once joints are filled, lightly compact them using a pointing trowel or squeegee to ensure they’re full. Add a bit more compound if required.

Step 5: Rinse and clean

Use plenty of clean water and a soft broom to rinse off any remaining compound from the surface. Ensure no residue is left on the paving, as it can harden and stain once dry.

6. Drying and curing

  • Joints will start to set within a few hours and are typically fully cured within 24–48 hours, depending on temperature and humidity.
  • Avoid walking on the area until joints have firmed up.
  • In cool or damp weather, allow extra curing time.

7. Aftercare and maintenance

  • Regular cleaning: Sweep the surface regularly to prevent dirt buildup.
  • Weed control: While EASYJoint inhibits weed growth, occasional manual removal may be needed around edges.
  • Repointing: For damaged or loose joints, simply reapply EASYJoint to the affected area after cleaning and wetting the joint.

8. Common mistakes to avoid

  • Applying on dry paving – always keep the surface soaked.
  • Insufficient rinsing – this can cause staining or a sticky residue.
  • Using on unstable paving – movement will cause cracking.
  • Using in freezing temperatures – avoid if below 5°C or if frost is expected.

9. Storage and shelf life

  • Keep tubs sealed and stored in a cool, dry place.
  • Once opened, use the contents within a few weeks.
  • Do not allow the product to dry out in the tub.

10. Frequently asked questions

Can EASYJoint be used in the rain?
Yes. It can be applied in wet or dry conditions, but not during heavy downpours or when the ground is waterlogged.

Will it work with porcelain paving?
Yes, provided joints are at least 3mm wide and 20mm deep, and the porcelain is pre-sealed or well-wetted.

Can I pressure wash after application?
Wait at least 7 days before pressure washing, and use a low-pressure fan setting.

Does EASYJoint come in different colours?
Yes, the most popular colours are Mushroom, Stone Grey, Basalt, Jet Black, and Tungsten, allowing you to match or contrast your paving.

11. Pro tips for a perfect finish

  • Work in small areas (2–4 m²) at a time to keep the surface wet and manageable.
  • Always rinse immediately after filling to prevent film residue.
  • Use two people if possible – one applying the compound, one keeping the surface wet.
  • On very porous stone such as sandstone, consider pre-sealing to reduce staining risk. View our range of sealers.

12. Final thoughts

Azpects EASYJoint makes paving jointing faster, cleaner, and more durable than traditional mortar. By following the correct wet application method and maintaining your paved area, you’ll achieve strong, flexible joints that resist cracking and weed growth for years. Explore the full range, including EASYJoint Select and EASYJoint PRO, for professional results every time.

Back to blog